Descripción

Ultra Small 2D Code Reader, Short-distance Type
Model SR-600
Type Close-range
Laser pointer Light source Visible red semiconductor laser (wavelength: 660 nm)
Output 90 µW
Pulse duration 200 µs
Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10)*1*2
Lights Light source High-intensity red LED
Reading Supported codes Barcode CODE39, ITF, Industrial2of5, COOP2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar CODE93, EAN/UPC, Trioptic CODE39
2D code QR, MicroQR, DataMatrix, PDF417, MicroPDF, MaxiCode, GS1 Composite (CC-A, CC-B, CC-C)
Minimum resolution Barcode 0.127 mm
2D code
Reading distance (typical examples) DataMatrix 35 mm to 95 mm (Cell size: 0.339 mm)
QR 31 mm to 97 mm (Cell size: 0.339 mm)
Barcode 29 mm to 106 mm (Narrow bar width: 0.339 mm)
Focal point 60 mm
Reading view range (at the focal length) 42.5mm x 27.1mm
Reading time (Typical) 21 ms (Focal distance, in QR CODE 21 x 21)
Terminal block Input Number of inputs 2 inputs (IN1, IN2), non-voltage input (relay contact, solid state)
Input type NPN open-collector output: 4 outputs (OUT1 to OUT4) 30 mA max. (24 V max.) Residual voltage 0.8 V max., leakage current 0.1 mA max.
Output Number of outputs 4 (OUT1, OUT2, OUT3, and OUT4)
Output type NPN open collector
Rated load 24 VDC, 30 mA
Leakage current when OFF 0.1mA or less
Residual voltage when ON 0.8V or less
I/O specifications Serial interface Communication method Conforms to RS-232C
Communication speed 9600/19200/38400/57600/115200 bps
Synchronisation between the transmitter and receiver Start-stop Synchronisation
Data bit length 7/8 bits
Stop bit length 1/2 bits
Parity check None/Even/Odd
USB Conforms to USB 2.0 Full Speed
Rating Power voltage 5 VDC +5 %, -10 %
Current consumption 630 mA or less
Environmental resistance Enclosure rating IP65
Ambient light Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux
Operating environment No dust or corrosive gas present
Ambient temperature 0 to +45 °C
Storage temperature -10 to +50 °C
Relative humidity 35 to 95 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 3 hours in each of the X, Y, and Z directions
Weight Approx. 160 g
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.
''