Descripción

Ethernet-compatible 2D Code Reader, Medium-distance Type
Model SR-751*1
Type Middle-range type
Receiver Sensor CMOS Image Sensor
Number of pixels 752 ? 480 pixels
Lighting Light source Red LED
Laser pointer Visible semiconductor laser, Wavelength 660 nm
Output 60 µW
Pulse duration 200 µs
Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*2)
Reading specifications Minimum resolution 2D 0.19 mm
Barcode 0.127 mm
Supported symbol 2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)
Barcode GS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII, CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39
Reading distance (typical examples) DataMatrix QR 45 to 165 mm (Cell size = 0.5 mm)
Barcode 45 to 195 mm (Narrow bar width = 0.5 mm)
Focal distance 100 mm
Field of view (at focal distance) 70.6 mm ? 45.0 mm
I/O specifications Control input Number of inputs 2
Input type Bidirectional voltage input
Maximum rating 26.4 VDC
Minimum ON voltage 15 VDC
Maximum OFF current 0.2 mA or less
Control output Number of outputs 3
Output type Photo MOS relay output
Maximum rating 30 VDC
Maximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or less
Leakage current when OFF 0.1 mA or less
Residual voltage when ON 1 V or less
Ethernet Communication standard 10BASE-T/100BASE-TX
Supported protocol TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPTM, PROFINET, MC protocol, KV STUDIO
Serial communication Communication standard RS-232C compliant
Transmission speed 9600, 19200, 38400, 57600, 115200 bps
Supported protocol Non-procedural, MC protocol, SYSWAY, KV STUDIO
Rating Power voltage Control port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*3
Current consumption Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*4
Environmental resistance Enclosure rating IP65
Ambient light Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux
Operating environment No dust or corrosive gas present
Ambient temperature 0 to +45 °C
Storage temperature -10 to +50 °C
Relative humidity 35 to 95 % RH (No condensation)
Storage relative humidity
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directions
Weight Approx. 160 g
*1 PROFINET is a trademark or registered trademark of PROFIBUS International. EtherNet/IPTM is a trademark or registered trademark of ODVA. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use the following power supply. - one that provides Class 2 output as defined in the CEC and NEC, or - one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1. *4 Peak operating current for PoE Power Class 2: 210 mA maximum.
''