Descripción

Sensor Head, Small Spot
Model LK-010
Type Sensor head Compact high-accuracy Sensor head
Measurement mode Normal,mirror surface
Reference distance 10 mm (Normal),7.0 mm (mirror surface)
Measuring range ±1 mm (Normal),±0.9 mm (mirror surface)
Light source Type Red semiconductor laser
Wavelength 670nm (Visible light), Class 2 laser product (JIS C6802)
Output 0.95 mW maximum
Spot diameter (at standard distance) Approx. 20 µm
Linearity ±0.25% of F.S.
Repeatability 0.1 µm*1
Analogue output Output voltage ±10 V (±9 V) (0.1 µm/mV)*2
Impedance 100 ?
Output current 4 to 20 mA (350 ? maximum)*3*4
Alarm output NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max.
Sampling cycle 128, 256, 512, 2,048 µs (selectable)
Other functions Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle
Temperature characteristics 0.04% of F.S./°C
Rating Power voltage 24 VDC ±10 %, Ripple (P-P) 10 % or less
Maximum current consumption 400 mA max.
Environmental resistance Enclosure rating IP64
Ambient light Incandescent or fl uorescent lamp: 10,000 lux max.
Ambient temperature 0 to +50 °C (No condensation)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Aluminium die-cast
Weight Approx. 85 g (including cable)
*1 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *2 When measurement is impossible, 12 V (31.2 mA) is output. *3 LK-010: When measurements cannot be performed, this is 12 V (21 mA). LK-035/030, LK-085/080, and LK-500: When measurements cannot be performed, this is 12 V (31.2 mA). *4 The ±5 V analog voltage output range (the ±
''