Descripción

Head: Small-diameter model with monitor camera
Model LS-9006M*1
Type Head: Small-diameter model
Measurement range 0.04 mm (0.01 mm) to 6 mm
Smallest detectable object 0.04 mm (0.01 mm)
Transmitter/receiver distance 60 ±5 mm
Repeatability ±0.03 µm*2
Measurement accuracy ±0.5 µm*3
Sampling cycle 16,000 samples/sec.*4
Transmitter/receiver direction and position detection Detection area 4 x 5 mm
Smallest detectable object 0.04 mm
Repeatability ±0.02 mm*5
Sampling cycle 4,000 samples/sec.
Light source InGaN green LED
Monitor camera Provided
Environmental resistance Enclosure rating IP67 (including connector)
Ambient light Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
Ambient temperature 0 to +50 °C
Relative humidity 20 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 15 G/6 ms
Material Aluminum
Weight Transmitter: Approx. 130 g Receiver: Approx. 300 g Base: Approx. 180 g
*1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. *2 A ±2? margin of error when measuring a o1.0 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. *3 Margin of error when a moving o1.0 mm rod is measured in the 2 mm x 4 mm measurement area using outer diameter mode. *4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. *5 A ±2? margin of error when measuring the position of a o1.0 mm rod in the centre of the measurement area with the average measurement number set as 512 times.
''