Descripción

Head: Standard model without monitor camera
Model LS-9030*1
Type Head: Standard model
Measurement range 0.3 mm (0.08 mm) to 30 mm
Smallest detectable object 0.3 mm (0.08 mm)
Transmitter/receiver distance 160 ±40 mm
Repeatability ±0.1 µm*2
Measurement accuracy ±2 µm*3
Sampling cycle 16,000 samples/sec.*4
Transmitter/receiver direction and position detection Detection area 20 x 24 mm
Smallest detectable object 0.3 mm
Repeatability ±0.2 mm*5
Sampling cycle 4,000 samples/sec.
Light source InGaN green LED
Monitor camera Not provided
Environmental resistance Enclosure rating IP67 (including connector)
Ambient light Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
Ambient temperature 0 to +50 °C
Relative humidity 20 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 15 G/6 ms
Material Aluminum
Weight Transmitter: Approx. 440 g Receiver: Approx. 440 g Base: Approx. 430 g
*1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. *2 A ±2? margin of error when measuring a o10 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. *3 Margin of error when a moving o10 mm rod is measured in the 10 mm x 20 mm measurement area using outer diameter mode. *4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. *5 A ±2? margin of error when measuring the position of a o10 mm rod in the centre of the measurement area with the average measurement number set as 512 times.
''