Descripción

Controller
Model TM-3001
Head compatibility Compatible
Number of connectable sensors 2 units max.*1
Display Minimum display unit 0.01 µm, 0.001 mm2, 0.01 °
Maximum display range ±9999.99 mm, ±99999.9 mm2, ±99999.9°
Input terminal block Laser remote interlock input Non-voltage input*2
Trigger input (for Head A)
Timing 1 input
Auto-zero 1 input
Reset input
Output terminal block Analogue voltage output ±10 V x 2 outputs, out put impedance: 100 ?*2
Total judgment output NPN open-collector output*2
Error output NPN open-collector output (N.C.)*2
Process output NPN open-collector output*2
Trigger input enable output
Adjusted error output
Expansion connector Trigger input (for Head A) Non-voltage input*2
Timing 2 input
Auto-zero 2 input
Programme switching input Non-voltage input, 4 inputs*2
Memory card save input Non-voltage input*2
Judgment/Binary output 3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output*3
Strobe output NPN open-collector output*2
Trigger input enable output
Analogue RGB monitor output SVGA (800 x 600 pixels)
RS-232C interface Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface 1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating Power voltage 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption 1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance Ambient temperature 0 to +50 °C
Relative humidity 35 to 85 % RH (No condensation)
Material Polycarbonate
Weight Approx. 1,120 g
*1 1 or 2 units can be connected only with the same head model *2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) *3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.
''