Descripción

Fibre Amplifier, Cable Type, Main Unit, NPN
Model FS-T1G
Light source Green LED
Response time 250 µs
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Orange LED
Timer function ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
External calibration input signal Non-voltage input (contact, solid state)
Input
Control output NPN: 100 mA (40 V) max. Residual voltage: 1 V max.*1
Stability output NPN open-collector: 50 mA max. (40 VDC max.), Residual voltage:1 V max.
Protection circuit Reversed polarity protection, Overcurrent protection, Surge absorber
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption 35 mA or less
Environmental resistance Ambient light Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)*2
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material Polycarbonate
Accessories Fittings
Weight Approx. 75 g
*1 La salida de alarma de interrupcion de conexion no esta disponible en ES-M2 (P). *2 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended
''