Descripción

Fibre Amplifier, Cable Type, PNP
Model FS-T22P
Type Auto
Product name ?
Cable length
Allowable bending radius
Light source Red LED
Sensitivity adjustment Button
Detecting distance (standard detection object) ?
Spot diameter
Minimum detectable object
Response time 500 µs
Hysteresis ?
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp Output: red LED, calibration: yellow LED, received light intensity and sensitivity allowance: green LED*1
Timer function ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
External tuning input signal Input time: 40 ms or more
Output PNP output
Control output PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max.
Stability output PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max.
Protection circuit Reversed polarity protection, Overcurrent protection, Surge absorber
Laser emission stop input ?
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption 50 mA
Environmental resistance Ambient light Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Material Polycarbonate
Weight Approx. 75 g
*1 This indicates stable operation and that sensitivity settings cannot be made.
''