Descripción

Fibre Amplifier, Cable Type, PNP
Model FS2-60P
Type Trimmer:Long detecting distance
Light source Red LED
Sensitivity adjustment 8-turn trimmer
Response time 250 µs
Operation mode LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp Output: Red LED Stable operation: Green LED
Timer function ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
External calibration input signal ?
Buzzer mode Buzzer ON when control output turns ON/Buzzer ON when alarm output turns ON/Buzzer OFF (switch-selectable)
Output PNP output
Control output PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max.
Stability output PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max.
Protection circuit Reversed polarity protection, Overcurrent protection, Surge absorber
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption 35 mA or less
Environmental resistance Ambient light Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Material Polycarbonate
Weight Approx. 61 g
''