Descripción

Extension Board for GT2-100N
Model GT2-E3N
Output NPN output
Mounting type Installed into GT2-100N/100P (up to 3 boards)
Main unit/Expansion unit -
Power supply voltage Supplied from the GT2-100N/100P
Power consumption Normal Eco half: 4,200 mW or less (140.0 mA or less at 30 V), Eco all: 4,000 mW or less (133.3 mA or less at 30 V)*1
Power saving (Eco) 4,000 mW or less (133.3 mA or less at 30 V)
Display range -
Display resolution
Control input Timing/preset/ reset/bank input No-voltage input
Control output HH/HI/GO/LO/LL NPN open collector, 40 V 50 mA or less*2, residual voltage 1 V or less
Response time hsp (3) /5/10/100/500/1,000 ms
Environmental resistance Ambient temperature -10 to +50 °C
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Materials Main body case/front cover: polycarbonate (PC), Key top: polyacetal (POM), Front sheet: polyethylene terephthalate (PET)
Power supply / I/O cable I/O: 30-pin connector (MIL standard)
Weight Approx. 80 g
*1 When the maximum number of sensor heads is connected, and all devices are set to power saving settings *2 When 2 or more sensor heads are connected, 20 mA or less.
''