Descripción

Main Unit, Positive-pressure Type, 1 Mpa, NPN
Model AP-C33W
Type Positive pressure
Rated pressure 0 to +1.000 MPa
Fluid type Air or non-corrosive gases
Type of pressure Gauge pressure
Display 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s
Operation indicator Red LED x 2 (corresponding to control output 1 and 2)
Power consumption Normal 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1
Display resolution Normal mode: 0.001 MPa, Focus mode: 0.1 kPa
Display temperature characteristic ±1 % of F.S. max.
Hysteresis Variable (Standard: 0.5 % of F.S.)*2
Response time (Chattering prevention function) 2.5, 5, 100, or 500 ms (selectable)
I/O Analogue output 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable)
Zero-shift input Input time: 2 ms or more. (or analog output selectable)
Control output NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
Pressure port Rc (PT) 1/8 180 ° rotation
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption Eco mode 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1
Environmental resistance Pressure resistance 1.5 MPa
Ambient temperature 0 to +50 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting
Accessories Power supply cord (2-m with connector), Unit seal
Weight Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable)
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode.
''