Descripción

Bar Type Main Unit 1560 mm
Model SJ-G156*1
Ion generation method Corona discharge method
Structure Shockless resistor connection type
Voltage application method/Applied voltage Pulse AC method/±7,000 V
Ion balance control method I.C.C. method
Ion balance ±30 V*2*3
Operating distance 50 to 2,000 mm
Control input NPN open-collector or no-voltage contact signal
Control output NPN type photo relay, 100 mA max. (40 V max.)
Major applications Alarm output, Ion level alarm output, condition alarm output, Ion balance adjustment (remote control), RS-485 communication function, connection via crossover wiring, C.A.B. structure, L.P.C. function
Air purge connection port M5
Air purge supplied pressure 0.2 MPa or less
Rating Power voltage 24 to 36 VDC ±10 %
Over-voltage category I
Pollution degree 2
Current consumption 250 mA (at 24 VDC)/150 mA (at 36 VDC)
Environmental resistance Ambient temperature 0 to +50 °C
Relative humidity 35 to 85 % RH (No condensation)
Material Electrode probe Tungsten
Electrode Stainless steel
Main unit ABS resin
Weight Controller ?
Bar Approx 1,550 g
*1 A 10-pin I/O cable or a 10-to-10 pin modular cable is required for connection. *2 SJ-G132/156/180/228 are measured at operating distance: 600 mm (10 Hz), 1,500 mm (1 Hz), ambient temperature: 0 to +50?C, relative humidity: 35 to 65% RH. (Ask for ion balance at an operating distance of 50 mm). *3 50 mm 33 Hz, 600 mm 10 Hz, 1,500 mm 1 Hz, ambient temperature: 0 to 50?C, relative humidity: 35 to 65% RH, below down-flow 0.3 m/s.
''