Descripción

Amplifier unit Main Unit
Model SK-1000
Type DIN rail mounting
Main unit/expansion unit Main unit
Display Display resolution 0.001 kV
Display range ±99.999 kV to 99 kV (4-level selection available)
Analogue voltage output ±5 V, 1 to 5 V, 0 to 5 V, output impedance 100 ?*1
Analogue current output 4 to 20 mA, maximum load resistance 350 ?*1
Control input Zero-shift input Non-voltage input*2
Timing input
Reset input
Bank input
Control output Judgement output Open collector output (NPN/PNP switching, N.O./N.C. switching)*3
Alarm output Open collector output (NPN/PNP switching, N.C.)*3
Power supply Power supply voltage 10 to 30 VDC, including 10% ripple (P-P)*4
Power consumption 1650 mW or below (55 mA or below with 30 V) (excluding load current of each output)*5
Environmental resistance Ambient temperature 0 to +50 °C (No freezing or condensation)
Relative humidity 10 to 85 % RH (No condensation)
Material Body case and front cover : PC , Key top : POM , Cable : PVC
Weight Approx. 150 g (including accessories)
*1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA selected for use. *2 Inputs are assigned to the four external input lines. Non-voltage input rating : ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating : maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. *3 NPN open collector output rating : maximum 50 mA/ch (20 mA/ch when expansion units are added) 30 V or below, residual voltage 1 V or below (1.5 V or below when adding 6 or more expansion units, including main unit). PNP open collector output rating : maximum 50 mA/ch (20 mA/ch when expansion units are added) below power supply voltage, residual voltage 2 V or below (2.5 V or below when adding 6 or more expansion units, including main unit). *4 Use 20 to 30 V as power supply voltage when 6 or more expansion units, including main unit, are to be used. *5 When connecting 8 units for DL connection, maximum power is consumption 11.3 W.
''